This is part of a 'How To' series on post process work.
Many of today's cameras have routines 'built-in' to remove lens aberrations. This includes lens distortion correction and also chromatic aberration (CA). Typically, these are very effective routines.
A large majority of lenses will display CA. Certainly most of the lenses I have owned over the years have displayed CA, in differing severity, from the very cheap to the very expensive.
Most good image editors have CA correction routines. Some work well, some not so well.
The ones I will cover here are Photoshop, DxO Optics Pro, and also an action for use in Photoshop.
Firstly, what is CA ?
If you want a detailed technical explanation, I'm the wrong guy to ask. I'm not that smart. However, good news, have a look at this link for an explanation at Cambridge In Colour - Click here
More simply, and so we can see it's effects in an image, here is an example of an image with CA, at left, and after it is fixed, at right.
This is a 100% view of the image and is only showing the very top right hand corner.
Note : Clicking on any image will take you to a larger example of that image
As can be seen in the example above, the Chromatic Aberration manifests itself in the form of purple fringing (PF), but also with green fringing.
So, let's explore a few ways to reduce/remove the CA.
Example 1
The original image.
Example 2
Fixing the image using the PF Killer action in Photoshop.
Note : This is a simple action which you can download - Click here. It is the action at the bottom of the page. The original web site for this has disappeared
Once downloaded, simply copy it to the Presets/Actions folder for Photoshop. When Photoshop is opened, just load the action for use.
Here I am simply showing the before/after as if you are familiar with running actions in Photoshop, it will be intuitive.
As can be seen in the above example, PF Killer does a good job of removing the purple CA. However, it does not tackle the green fringing.
Example 3
Note : I open all my Raw and Jpeg images in Adobe Camera Raw (ACR). To understand how to set up Photoshop/Photoshop Elements to do this - Click here
Here, I have opened my image in ACR and selected the Lens Corrections pane. This is also pretty much the same as the adjustments which are available in Adobe Lightroom.
Example 4
As there is no preset profile for my camera/lens combination in ACR, I have selected the Manual tab. If your camera/lens combination does have an Adobe profile, then it should correct automatically.
With the Manual pane open, I have selected Defringe : All Edges, and adjusted the Red/Cyan Fringe and Blue/Yellow Fringe sliders.
For this particular image, I have used the values of -20 and +50 respectively. This will be different for any given camera/lens combination.
Example 5
The original image, at left, and the image after adjustment in ACR, at right.
Example 6
As can be seen, in the above example, ACR has done a good job of reducing the CA but has not removed it all, especially the purple CA. One way to help remove this, is to now run the PF Killer action.
Here, are the same images shown in the last example but with PF Killer now run on the image at right, and after the adjustments I made in ACR.
Example 7
If your camera/lens combination has a Lens Correction Module in DxO Optics Pro, then I have found this to be pretty much the best CA correction tool I have used.
Note : To check if your camera/lens combination is supported with a DxO Lens Correction Module - Click here to check DxO's availability page
The image as opened in DxO.
Example 8
In this case, my camera has a Lens Correction Module in DxO.
Here, DxO has automatically corrected the image. In the 'Detail' pane I have turned off the 'DxO Lens Softness' correction and turned on the 'Purple Fringing' correction.
Simple.
Note : I also have DxO Lighting HDR Slight - Auto turned on. Hence the lighter image
Examples 9 through 13
These examples simply show the effects, on an image which has a predominance of purple and blue, and the effect which different CA removal techniques have on those colours. The image has purple fringing in the top left corner which I wish to remove.
The original image.
Note : Clicking on any image will take you through to a larger size
Fixed in ACR - Manual process as there is no lens correction profile for this camera/lens.
Fixed in DxO - Automatic.
Fixed with PF Killer. As can be seen, this is one of the draw backs with PFK. It is non-discriminate.
The same image as above, but what I have done here is to 'unlink' the correction mask layer and then use the Magic Eraser to restore the colours in the fishermans clothing. Again, a manual process.
Anyway, That's it. Hope you find it helpful.
Cheers
Other posts in this series - Click here for the index page.
...
Showing posts with label dxo. Show all posts
Showing posts with label dxo. Show all posts
Monday, 29 November 2010
Saturday, 27 November 2010
PP Tips 12 - DxO Optics Pro 6.5
This is part of a 'How To' series on post process work.
I was using DxO Optics Pro quite regularly a couple of years back, for my S100 fs images. I thought it was very good.
The main reason I stopped using it was due to my upgrading from Photoshop CS2 to CS3, then CS4, and now CS5.
Recently, I received an email from DxO mentioning that their new version (6.5) also did Single-Shot HDR. So, intrigued, I downloaded it and started playing.
Below, are just a few screen shots, and edit examples, showing some of the different things you can use DxO for.
Note : To see larger sizes of the images, simply click on the image
Update 281110 - Since publishing this, I have found that it is better to turn off the 'DxO Lens Softness' adjustment, particularly with Jpeg images. What this is doing is adding a 'sharpening' step and creating artifacts. With it off the image is much smoother
Image 1
This simply shows DxO opened. The image I have selected to process is the one at bottom right and is a Jpeg file from the Fujifilm HS-10.
Once the image is selected, simply drag it into the 'Project' pane at bottom.
Image 2
Once the image is in the project pane, simply select that image and click on the 'Customize' button at top left. The image will then open and also adjustment menus will appear.
I am using this in Advanced User mode (top right) so that I have a full selection of adjustment menus. I have also docked all my menus at the right side. To do this, you simply click on the three bars, to right of the menu name, and then select where you wish to dock.
There is also a 'Correction Preview' button which can be clicked to give a 'Before' view. Alternately, you can select to display the image in two panes as a before/after view. See the buttons next to 'Image' at top left.
Image 3
The only adjustment I am making to this image is to select DxO Lighting - HDR Auto - Slight. All the other adjustments are simply at default.
There is no lens correction module for the HS-10, so some of the lens correction features are not available. For the purposes here it does not matter, as I am simply doing 'lighting' adjustment.
Note : I have scrolled my adjustments down so that the menu I wish to use is visible
Image 4
Once adjusted, it is a simple matter of selecting the 'Process' button at top. A dialogue box will appear with instructions.
Note : At left are the Output Settings save options. Here I am simply saving as a Jpeg file. If you click any of the options, you can then specify additional settings. Also note that there is no dialogue which appears for file name options. The image is simply saved in the same folder as the original, but with DxO added after the file name, so the original is intact
Image 5
The finished image.
Image 6
This image is a Raw file from the Fujifilm S100 fs. DxO does have a lens correction module for the S100 fs, so things such as Chromatic Aberration, and lens distortion, are automatically adjusted as the image opens.
As you can see, this image is very dark. I have been doing a series on 'Thai Life' for many years, so images like this are worth rescuing.
Image 7
The first thing I want to do with this image is 'open up' the lighting. Here I have simply selected DxO Lighting - HDR Auto - Strong.
Image 8
I also wish to correct my verticals. Here I have selected Geometry and in the Keystoning/Horizon pane I have selected Advanced Settings.
Next, I have selected the box with the two vertical lines. Once this is selected, the image will open in a before/after view and instructions will be given to place two vertical lines on the image.
If you look at the left pane, you can see the two lines I have placed and the right pane shows the correction effect. Greyed out areas also show which parts of the image are now outside the aspect ratio of the original.
Image 9
To now crop the image, I select the button next to 'Tool' and crop lines will appear. The image will be cropped in the Process stage.
Note : I have Correction - 'Auto based on Keystoning/Horizon' selected, and also Aspect Ratio - 'Preserve original ratio' selected
Image 10
Now, I simply select Process and follow the instructions.
Image 11
By selecting the 'View' button, I can see the processed image and easily go back and make any other corrections, if desired.
Image 12
The finished image after some additional steps were done in Photoshop to reduce noise, sharpen, adjust levels and crop.
Image 13
Again, an S100 fs Raw file.
This image was shot for a beach side resort quite some time back. At the time, the image was edited using Photoshop. As it suffered a fair amount of CA, I wanted to try out DxO to see how it handled correcting this.
This is the image as it opens in DxO and after I have selected DxO Lighting - HDR Auto - Medium.
Image 14
Here, I am simply enlarging the image and looking at the top right corner. This is the 'Before correction' view.
Image 15
The image showing the corrections. The CA and distortion have been automatically corrected by DxO. All I have done is adjust the DxO Lighting.
Image 16
The image at normal view size - Before correction.
Image 17
The image at normal view size - After correction.
Image 18
The finished image. I have done a small amount of extra sharpening, levels and straightening in Photoshop.
Image 19
What about Single-Shot HDR ?
I took this shot of a Thai rural store and thought it would look good as an HDR image.
This is a Jpeg image from the S100 fs and I have simply opened it, selected DxO Lighting - HDR Auto - Slight.
I have then clicked on the 'Presets' button and selected HDR (Single Shot), HDR - Artistic (Raw only).
Note : It may say 'Raw only', but it doesn't matter that this is a Jpeg file, the action still works fine. I don't know if it is supposed to, but I'm not complaining
Image 20
The image after adjustment.
Image 21
The finished image.
Again, I have done a little extra sharpening, levels, straightening and cropping work in Photoshop.
Cheers
Other posts in this series - Click here for the index page.
...
I was using DxO Optics Pro quite regularly a couple of years back, for my S100 fs images. I thought it was very good.
The main reason I stopped using it was due to my upgrading from Photoshop CS2 to CS3, then CS4, and now CS5.
Recently, I received an email from DxO mentioning that their new version (6.5) also did Single-Shot HDR. So, intrigued, I downloaded it and started playing.
Below, are just a few screen shots, and edit examples, showing some of the different things you can use DxO for.
Note : To see larger sizes of the images, simply click on the image
Update 281110 - Since publishing this, I have found that it is better to turn off the 'DxO Lens Softness' adjustment, particularly with Jpeg images. What this is doing is adding a 'sharpening' step and creating artifacts. With it off the image is much smoother
Image 1
This simply shows DxO opened. The image I have selected to process is the one at bottom right and is a Jpeg file from the Fujifilm HS-10.
Once the image is selected, simply drag it into the 'Project' pane at bottom.
Image 2
Once the image is in the project pane, simply select that image and click on the 'Customize' button at top left. The image will then open and also adjustment menus will appear.
I am using this in Advanced User mode (top right) so that I have a full selection of adjustment menus. I have also docked all my menus at the right side. To do this, you simply click on the three bars, to right of the menu name, and then select where you wish to dock.
There is also a 'Correction Preview' button which can be clicked to give a 'Before' view. Alternately, you can select to display the image in two panes as a before/after view. See the buttons next to 'Image' at top left.
Image 3
The only adjustment I am making to this image is to select DxO Lighting - HDR Auto - Slight. All the other adjustments are simply at default.
There is no lens correction module for the HS-10, so some of the lens correction features are not available. For the purposes here it does not matter, as I am simply doing 'lighting' adjustment.
Note : I have scrolled my adjustments down so that the menu I wish to use is visible
Image 4
Once adjusted, it is a simple matter of selecting the 'Process' button at top. A dialogue box will appear with instructions.
Note : At left are the Output Settings save options. Here I am simply saving as a Jpeg file. If you click any of the options, you can then specify additional settings. Also note that there is no dialogue which appears for file name options. The image is simply saved in the same folder as the original, but with DxO added after the file name, so the original is intact
Image 5
The finished image.
Image 6
This image is a Raw file from the Fujifilm S100 fs. DxO does have a lens correction module for the S100 fs, so things such as Chromatic Aberration, and lens distortion, are automatically adjusted as the image opens.
As you can see, this image is very dark. I have been doing a series on 'Thai Life' for many years, so images like this are worth rescuing.
Image 7
The first thing I want to do with this image is 'open up' the lighting. Here I have simply selected DxO Lighting - HDR Auto - Strong.
Image 8
I also wish to correct my verticals. Here I have selected Geometry and in the Keystoning/Horizon pane I have selected Advanced Settings.
Next, I have selected the box with the two vertical lines. Once this is selected, the image will open in a before/after view and instructions will be given to place two vertical lines on the image.
If you look at the left pane, you can see the two lines I have placed and the right pane shows the correction effect. Greyed out areas also show which parts of the image are now outside the aspect ratio of the original.
Image 9
To now crop the image, I select the button next to 'Tool' and crop lines will appear. The image will be cropped in the Process stage.
Note : I have Correction - 'Auto based on Keystoning/Horizon' selected, and also Aspect Ratio - 'Preserve original ratio' selected
Image 10
Now, I simply select Process and follow the instructions.
Image 11
By selecting the 'View' button, I can see the processed image and easily go back and make any other corrections, if desired.
Image 12
The finished image after some additional steps were done in Photoshop to reduce noise, sharpen, adjust levels and crop.
Image 13
Again, an S100 fs Raw file.
This image was shot for a beach side resort quite some time back. At the time, the image was edited using Photoshop. As it suffered a fair amount of CA, I wanted to try out DxO to see how it handled correcting this.
This is the image as it opens in DxO and after I have selected DxO Lighting - HDR Auto - Medium.
Image 14
Here, I am simply enlarging the image and looking at the top right corner. This is the 'Before correction' view.
Image 15
The image showing the corrections. The CA and distortion have been automatically corrected by DxO. All I have done is adjust the DxO Lighting.
Image 16
The image at normal view size - Before correction.
Image 17
The image at normal view size - After correction.
Image 18
The finished image. I have done a small amount of extra sharpening, levels and straightening in Photoshop.
Image 19
What about Single-Shot HDR ?
I took this shot of a Thai rural store and thought it would look good as an HDR image.
This is a Jpeg image from the S100 fs and I have simply opened it, selected DxO Lighting - HDR Auto - Slight.
I have then clicked on the 'Presets' button and selected HDR (Single Shot), HDR - Artistic (Raw only).
Note : It may say 'Raw only', but it doesn't matter that this is a Jpeg file, the action still works fine. I don't know if it is supposed to, but I'm not complaining
Image 20
The image after adjustment.
Image 21
The finished image.
Again, I have done a little extra sharpening, levels, straightening and cropping work in Photoshop.
Cheers
Other posts in this series - Click here for the index page.
...
Labels:
dave lloyd,
dxo,
edit,
eyemindsoul,
forum,
fujifilm,
fujifilm s100fs,
hs10,
post process,
pp tips,
tutorial
Saturday, 20 November 2010
Single-Shot HDR
Sometimes an image can be very badly exposed. There are several ways to recover but one I was reading about today was DxO Labs latest Optics Pro.
So, I downloaded it and played around with a couple of images.
One example below.
Image 1
This is the Raw file as it came from my Fujifilm S100fs
Image 2
The file after running it through DxO and applying HDR - Strong.
Well, it does what it says it will do. Lifts the shadows and preserves the highlights and without overly affecting the colour. Interestingly, and unlike some other HDR packages, it did not add noise nor try to make the colours look like something from a candy shop.
It looks a little 'washed out' here, but I will fix that in the next step.
Image 3
The same as above but with some levels and saturation adjustment in Photoshop. The amount of adjustment is purely to taste. I didn't want an 'over cooked' HDR look but wanted some vibrance and life in the image.
Cheers
...
So, I downloaded it and played around with a couple of images.
One example below.
Image 1
This is the Raw file as it came from my Fujifilm S100fs
Image 2
The file after running it through DxO and applying HDR - Strong.
Well, it does what it says it will do. Lifts the shadows and preserves the highlights and without overly affecting the colour. Interestingly, and unlike some other HDR packages, it did not add noise nor try to make the colours look like something from a candy shop.
It looks a little 'washed out' here, but I will fix that in the next step.
Image 3
The same as above but with some levels and saturation adjustment in Photoshop. The amount of adjustment is purely to taste. I didn't want an 'over cooked' HDR look but wanted some vibrance and life in the image.
Cheers
...
Labels:
dave lloyd,
dxo,
dxo optics pro,
edit,
eyemindsoul,
forum,
fujifilm,
fujifilm s100fs,
hdr,
post process,
thailand
Subscribe to:
Posts (Atom)





































